Sweden > Products > Fifth Wheels > SK-S 36.20 Series > SK-S 36.20

SK-S 36.20

Performance Guarantee

3 years or 500,000 km in accordance with SAF-HOLLAND warranty conditions

Reliable and economic - A decision that is easy to make

The weight-optimised spheroidal graphite cast construction consists of a few wearing parts made of high-strength materials; if required, they can be replaced within about 20 minutes.

Their service life is as long as that of the tractor. This contributes decisively to the economic efficiency of the entire vehicle.

Ideal for tractor trailer combinations with payloads of up to 20 tonnes.

Mounting Plates and Kits

Mounting plates are for connecting fifth wheels to the vehicle. They must be firmly connected to the frame construction of the tractor.
SAF-HOLLAND mounting plates enable the optimum use of the permissible overall height of commercial vehicles.

· Mounting plates without pre-drilled holes
· Mounting plates with pre-drilled holes
· Mounting kits
· Made of high grade, weldable steel plate
· Wide range, optimal design for all tractor and fifth wheels
· 7 individual mounting plate heights: 12, 16,22,40, 50, 100 and 150 mm
· The combinations of mounting plates and fifth wheels enable 23 different total overall heights, thereby covering all requirements from the lowest to the highest construction type
· Approved for forced steering
· Mounting hole pattern according to DIN 74081, DIN 74084 and ISO 3842
· Wider range of application due to higher imposed load and higher D-value
· Type approved

Slider SK-V 20

Sliders allow optimal utilisation of permissible axle loads and vehicle lengths.

They enable the coupling point of tractors to be changed quickly and easily. The fifth wheel can be secured in 14 different longitudinal positions, allowing the coupling of semi-trailers with different kingpin positions.

The slotted base rails with teeth and slotted rails are mounted directly to the supporting frame of the tractor. The carriage with the locking mechanism is designed for mounting fifth wheels with an overall height of 150-250 mm.

SK-S 36.20 S

The lightweight, cast 20t fifth wheel prepared for RECOSS®

RECOSS® - The proven 3-sensor safety system for fifth wheel SK-S 36.20

SK-S 36.20 DS

The compact, lightweight fifth wheel with direct mounting prepared for RECOSS®.

The lightweight fifth wheel for 2-axle 18t semi-trailer tractors for highway application in combination with RECOSS® - The proven 3-sensor safety system for fifth wheel SK-S 36.20.

SK-S 36.20 VS

The lightweight, cast 20t fifth wheel with mounting angles for Volvo vehicles prepared with RECOSS®

RECOSS® - The proven 3-sensor safety system for fifth wheel SK-S 36.20

SK-S 36.20

The lightweight, cast 20t fifth wheel. (Standard)
· Weight optimised fifth wheel
· Dead weight reduced by 8 kg
· Reliable and robust
· Single handed operation
· Automatic safety lock
· Simple and safe wear adjustment
· Permanent, maintenance-free bearings
· Optimised lubrication channels for effective grease flow
· Connections for central lubrication

SK-S 36.20 D

The compact, lightweight fifth wheel with direct mounting.

The new lightweight fifth wheel for 2-axle 18t semi-trailer tractors for highway application.
· Easy to mount directly on the vehicle chassis
· Weight optimised fifth wheel: higher payload
· Single handed operation
· Automatic safety lock
· Simple and safe wear adjustment
· Permanent, maintenance-free bearings
· Optimised lubrication channels for effective grease flow
· EU test no.: e 1-00-0218

SK-S 36.20 V

The lightweight, cast 20t fifth wheel with mounting angles for Volvo vehicles.
· Weight optimised fifth wheel
· No additional mounting plate required
· 10-15 kg higher payload with lower payload
· Reliable and robust
· Single handed operation
· Automatic safety lock
· Simple and safe wear adjustment
· Permanent, maintenance-free bearings
· Optimised lubrication channels for effective grease flow