中国 > 产品 > Fifth Wheels > SK-S 36.20 系列 > SK-S 36.20

SK-S 36.20

可靠性和经济性——一个容易取舍的决定

重量最优化的球墨铸造结构同时包括高强度材料制成的磨损件；必要时，它们可在大约20分钟内进行更换。

该产品使用寿命长达牵引车的使用寿命。这为您整辆车的经济效益带来了决定性的贡献。

牵引车和挂车连接的理想选择，有效载荷高达20吨。

Mounting Plates and Kits

Mounting plates are for connecting fifth wheels to the vehicle. They must be firmly connected to the frame construction of the tractor.
SAF-HOLLAND mounting plates enable the optimum use of the permissible overall height of commercial vehicles.

· Mounting plates without pre-drilled holes
· Mounting plates with pre-drilled holes
· Mounting kits
· Made of high grade, weldable steel plate
· Wide range, optimal design for all tractor and fifth wheels
· 7 individual mounting plate heights: 12, 16,22,40, 50, 100 and 150 mm
· The combinations of mounting plates and fifth wheels enable 23 different total overall heights, thereby covering all requirements from the lowest to the highest construction type
· Approved for forced steering
· Mounting hole pattern according to DIN 74081, DIN 74084 and ISO 3842
· Wider range of application due to higher imposed load and higher D-value
· Type approved

Slider SK-V 20

Sliders allow optimal utilisation of permissible axle loads and vehicle lengths.

They enable the coupling point of tractors to be changed quickly and easily. The fifth wheel can be secured in 14 different longitudinal positions, allowing the coupling of semi-trailers with different kingpin positions.

The slotted base rails with teeth and slotted rails are mounted directly to the supporting frame of the tractor. The carriage with the locking mechanism is designed for mounting fifth wheels with an overall height of 150-250 mm.

SK-S 36.20 S

The lightweight, cast 20t fifth wheel prepared for RECOSS®

RECOSS® - The proven 3-sensor safety system for fifth wheel SK-S 36.20

SK-S 36.20 DS

The compact, lightweight fifth wheel with direct mounting prepared for RECOSS®.

The lightweight fifth wheel for 2-axle 18t semi-trailer tractors for highway application in combination with RECOSS® - The proven 3-sensor safety system for fifth wheel SK-S 36.20.

SK-S 36.20 VS

The lightweight, cast 20t fifth wheel with mounting angles for Volvo vehicles prepared with RECOSS®

RECOSS® - The proven 3-sensor safety system for fifth wheel SK-S 36.20

SK-S 36.20

The lightweight, cast 20t fifth wheel. (Standard)
· Weight optimised fifth wheel
· Dead weight reduced by 8 kg
· Reliable and robust
· Single handed operation
· Automatic safety lock
· Simple and safe wear adjustment
· Permanent, maintenance-free bearings
· Optimised lubrication channels for effective grease flow
· Connections for central lubrication

SK-S 36.20 V

The lightweight, cast 20t fifth wheel with mounting angles for Volvo vehicles.
· Weight optimised fifth wheel
· No additional mounting plate required
· 10-15 kg higher payload with lower payload
· Reliable and robust
· Single handed operation
· Automatic safety lock
· Simple and safe wear adjustment
· Permanent, maintenance-free bearings
· Optimised lubrication channels for effective grease flow

SK-S 36.20 D

The compact, lightweight fifth wheel with direct mounting.

The new lightweight fifth wheel for 2-axle 18t semi-trailer tractors for highway application.
· Easy to mount directly on the vehicle chassis
· Weight optimised fifth wheel: higher payload
· Single handed operation
· Automatic safety lock
· Simple and safe wear adjustment
· Permanent, maintenance-free bearings
· Optimised lubrication channels for effective grease flow
· EU test no.: e 1-00-0218